It can easily be connected to any gas boiler or air conditioning device that has a double wire connector for a room thermostat, regardless of whether it has a 24 V or 230 V control circuit.This distance may become considerably shorter within a building, especially when a metal structure or a reinforced concrete wall stands in the way of radio waves.
The switching sensitivity of the thermostat can be selected: 0.2C (factory default setting, recommended for radiator-based heating systems) or 0-0.2C (this setting is recommended for underfloor heating). It is reasonable to locate it in a room used regularly or for many hours per day so that it is in the direction of natural ventilation in the room but protected from drought or extreme heat (e.g. ![]() Computherm Wireless Thermo Control System User Serial Number OfUsing the large.or.button on the front panel of the device, set the serial number of the current day (Monday 1. By pressing the ReseT button, the pipe protection function is reset to factory default setting (HP:OFF). To prevent the pump from sticking, the activated pump protection function switches on the boiler for a one minute period at 12:00 p.m. Press the seT button again and hold it down and press the pRog button, too. At this point the device gets into programming mode and the numbers indicating the days of the week (1 2 3 4 5 6 7) are flashing on the display. At this point the next programming step should be performed, i.e. P2 should be set. As in the previous steps, the time value to be set will flash on the display. Computherm Wireless Thermo Control System User Install The ReceiverATTeNTION: Do not install the receiver unit under the housing of the boiler because it may shield radio signals and compromise wireless (radio-frequency) connection. If the distance between the transmitter and receiver units is too large due to local circumstances and it makes the wireless (radio-frequency) connection unreliable, install the receiver unit nearer to the place of thermostat.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |